Bucks County Deck & Patio Cleaning
Your deck and patio are where Bucks County summers actually happen – until algae, mildew, and UV graying take over. We clean wood decking, composite/Trex decking, and attached patio surfaces using a process matched to your material.
Why It Matters
Why This Service Matters
Protects your investment
A deck or patio is an expensive addition – regular cleaning is far cheaper than premature board replacement.
Safety
Algae and mildew make wood and stone surfaces genuinely slick underfoot, especially near a pool.
Required stain prep
Stain and sealant won’t bond properly over dirt, mildew, or UV-grayed wood fibers.
Extends wood life
Removing trapped moisture-holding growth slows the natural weathering and rot process.
If You Neglect It
What Happens If You Skip It
- Wood rot and splintering from moisture trapped against deck boards, especially where boards meet joists.
- UV graying becomes permanent-looking, eventually requiring sanding rather than a simple wash.
- Composite decking stains set in from organic buildup and leaf tannins.
- Patio stone or paver staining and slip risk compound near pools and furniture traffic.
- What could’ve been a wash becomes a full sand-and-refinish project after multi-year neglect.
How Often
Recommended Frequency
Variables that affect your timing:
- Material: wood needs more frequent attention than composite/Trex
- Shade: decks under trees or pergolas stay damp longer
- Ground contact and drainage: low-airflow decks trap moisture longer
- Staining plans: cleaning must happen before staining, with a dry-out period after
Warning Signs
Signs You Need This Service
- Gray, weathered-looking wood that used to be brighter
- Slick green or black film, especially in shaded corners
- Visible mildew where boards meet the ground
- Composite decking that looks dingy despite being low-maintenance
- Planning to stain, seal, or sell – cleaning should come first
Our Process
How We Do It
Furniture is cleared before we start; for wood decking we’ll walk you through the recommended 24–48 hour dry time before staining.
Clean
Low-pressure wash with a cleaning solution to lift dirt, algae, and mildew from wood grain.
Brighten
A brightening treatment restores the wood’s natural color (wood decking only).
Treat
A final treatment step protects the wood and slows regrowth.
Composite & Patio
Single-stage wash formulated for composite material or stone/paver surfaces.
Materials We Clean
Surfaces & Materials
Wood decking, composite/Trex decking, natural stone patios, and paver patios attached to a deck area.
Pricing
Average Pricing
| Surface | Typical Price |
|---|---|
| Composite/Trex decking | ~$0.20 per sq ft |
| Wood decking (3-stage process) | $1.75 – $2.50 per sq ft |
| Patio (mid-size) | $150 – $225 |
Pricing varies with material condition, buildup level, and square footage. See our full pricing page for details.
FAQ
Frequently Asked Questions
Can deck cleaning prep my deck for staining or sealing?
Yes, and it’s required, not optional. After cleaning and brightening, we recommend a 24–48 hour dry-out period before staining.
Is this safe for Trex or composite decking?
Yes – composite decking gets a single-stage wash with a solution formulated specifically for composite material.
How is deck cleaning different from patio cleaning?
Decking uses a different process and solution than stone, paver, or concrete patio surfaces – we treat each material appropriately.
Will this remove all the gray from my wood deck?
In most cases, yes – though very old or neglected wood may need a follow-up treatment or light sanding.
Ready for a Free Quote?
Send us a few photos and we’ll get you an accurate price, usually within 24 hours.